英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字,中文词皆可:



安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • NBMA What is it? - Cisco Community
    With a NBMA network, to send a frame to 10 destinations, you have to send 10 copies of the frame, one to each destination With a broadcast network (which, by definition, must be multiple access) you merely send a single frame with a multicast or broadcast address which is recognized by all 10 destinations
  • Why is it called NBMA, anyway - Cisco Learning Network
    RFC 2332 - NBMA Next Hop Resolution Protocol (NHRP) The NBMA Next Hop Resolution Protocol (NHRP) allows a source station (a host or router), wishing to communicate over a Non-Broadcast, Multi-Access (NBMA) subnetwork, to determine the internetworking layer addresses and NBMA addresses of suitable "NBMA next hops" toward a destination station
  • Difference between Broadcast network and NBMA in OSPF.
    Physically and logically it is NBMA but OSPF is defined to have different behaviors There is no election of DR BDR and every router forms a full adjacency with every neighbor that it finds Does that meant -> In NBMA network with 4 routers with OSPF configured -> I will have 3 neighbours and 2 adjacency on a DROTHER router
  • Cisco Learning Network
    Keith at CBT Nuggets has a great series of lessons on OSPF - Frame Relay - NBMA that are just great and really a lot of fun to build With that said, I have built to the best of my knowledge the exact lab Keith uses in the video series The configs are attached in a zip file Hopefully anyone studying for CCNP Route will enjoy this
  • Difference between NBMA vs point-to-multipoint NB (OSPF) - Cisco Community
    The NBMA is the type of network The pt-to-multipt is the type of interface If you config the OSPF w "non-broadcast", it will not broadcast the hello, so you have to manual config the neighbor Therefore, in NBMA, you can config the network type as "broadcast" then the neighbor will be up due to broadcast the hello actively
  • NBMA - Cisco Community
    The term NBMA refers to the inherent capabilities of the original Frame Relay Generally, it is used to compare capabilities of technologies such as Frame Relay (e g ATM, X 25) to the familiar capabilities of Ethernet-based LANs In an Ethernet-based LAN you can have many end-stations grouped in an L3 subnet
  • OSPF with NBMA network - Cisco Learning Network
    With NBMA networks like frame-relay all the routers that wants to participate in the OSPF routing will not be able to connect with some of the other routers due to non-broadcast property of the NBMA network I am trying to visualize the workarounds in an NBMA network If I configure the neighbor command, it configures the neighbors statically
  • NHRP シリーズ : その2 動作確認及び H と % の違いについて - Cisco Community
    NHRPに焦点を当てたシリーズです。 NHRP シリーズ : その1 NHRP とは? その2、として実際の動作をMultipoint GRE(IPsecなしのDMVPN)構成で見ていきます。 NW構成は下記になります。 基本動作の確認 各ルータの状況は下記の通りです。 NHRPでTunnelのIPとNBMA(物理)のIPアドレスの紐づけができています。 NHRPの
  • PIM-SM over DMVPN and NBMA-Mode - Cisco Community
    And one more information for your reference is the command 'ip pim nbma-mode' also keep track on the NBMA IP address + interface in the OIL, not just the interface So, it has addressed the RPF issue ip pim nbma-mode command in interface configuration mode This command allows the router to track the IP address of each neighbor when a PIM join
  • Solved: Show DMVPN unknown Peer NBMA Addr - Cisco Community
    ip nhrp nhs 10 255 12 1 nbma 66 232 64 83 multicast ip nhrp nhs 10 255 12 2 nbma 66 232 64 82 multicast ip tcp adjust-mss 1360 load-interval 30 tunnel source BDI921 tunnel mode gre multipoint tunnel key 136 tunnel vrf ISP1 tunnel protection ipsec profile PRIMARY-IPSEC-PROFILE shared #show dm Interface: Tunnel136, IPv4 NHRP Details Type:Spoke





中文字典-英文字典  2005-2009