英文字典,中文字典,查询,解释,review.php


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       


安装中文字典英文字典辞典工具!

安装中文字典英文字典辞典工具!










  • Drilling Toolpaths - Vectric
    Drilling allows the centers of selected closed vectors to be drilled to a specified depth The Tool Database includes an option to specify the Drill diameter and cutting parameters Watch this video to see this in action: This specifies the depth at which the toolpath is calculated from
  • Set toolpath Cut Depth from imported vectors - Vectric Customer
    " Set toolpath Cut Depth from imported vectors" in the vector selection menu when assigning a tool path is mentioned once in the manual on page 233 I have been trying to figure out this option: I guess to get a proper layer name to assign a cut depth to a certain vector?
  • Getting Started with CNC Part 2: Tool Paths and Cutting Tools
    CNC expert Randy Johnson explains how to set up toolpaths for cutting carving a project on a computer-numerically controlled (CNC) router using VCarve pro design software Randy demonstrates step-by-step how to set cutting depth and speed, how to choose the cutting tool (bit), carving with a V-carving bit, and more
  • Vcarve Pro setting questions - Inventables Community Forum
    If however you first “Select” a tool, and then use “Edit”, you can adjust all the tool parameters such as tool size, depth of cut, step over and so on, and these new settings will only be save in the current project (the master tool database remains unchanged)
  • VCarve Pro
    Set the Start Depth to zero and your Cut Depth to the desired depth The Cut Depth MUST be less than the thickness of your material! Uncheck Show advanced toolpath options Click the Select button to change your tool bit
  • 3D model depth help - Vectric - Onefinity CNC Forum
    Software is V-Carve Pro I set the model depth (Z) to 0 24" and established a vector boundary around the image I programmed a “Bowl Bit” (3 4") to hog out material (pocket toolpath) between that boundary and four “clamp spots” at the corners (those will be trimmed away manually after it’s done)
  • Best way to set up this tool path? - CAMheads CNC Router . . .
    Most of the time, the Vcarve toolpath will cut on the inside of each line within the enclosed vectors Use a small bit diameter or shallower pass depth and it will make passes on the inside of each line resulting in a smooth finish if you have your feeds and speeds correct
  • V Carve ToolPath Cut Depth - Vectric Customer
    The depth of the profile cut may be critical to expose the underlying color but if it is set too deep the lettering will not look good It will also depend on the font and the size of the lettering


















中文字典-英文字典  2005-2009