Need Help with ZFS Pool! Expanding Mirror VDEV with a Single Drive Hey everyone, I'm currently facing a bit of a conundrum with my ZFS pool setup, and I'm hoping that some of you knowledgeable folks out there can lend a hand I have a ZFS pool with a mirror VDEV configuration (2 x 4TB), and I'm looking to expand it by adding a single drive (1 x 6TB) Here are
SOLVED - Change stripe vdev layout to mirror - TrueNAS After confirming going from stripe to mirror was possible I went ahead and built my system with two storage pools An "main" pool with 2 x 8TB drives for bulk storage and a "fast" pool with SSD's At the time of building the "fast" pool I only had access to a single 750GB SSD Knowing that I could extend the pool later, I configured it as a stripe
Some differences between RAIDZ and mirrors, and why we use . . . - TrueNAS ZFS is a complicated, powerful system Unfortunately, it isn't actually magic, and there's a lot of opportunity for disappointment if you don't understand what's going on RAIDZ (including Z2, Z3) is good for storing large sequential files ZFS will allocate long, contiguous stretches of disk
Hanging a 45lbs mirror to drywall - Home Improvement Stack Exchange How many points of support are you trying to hang the mirror from? You might want anything from a plastic drywall insert to maybe a screw in insert or move up to a toggle bolt or preferably screw into a stud if you haven't ruled out the possiblity
How can I enlarge a hole in a mirror piece of glass? 0 To cut a hole in a mirror requires a diamond hole saw To freehand one like you have will be challenging Normally a hole that big would require a drill stand, which is a specialized piece of equipment You might be able to find a compact sink wrench of the tubular kind